Skip to product information
1 of 1

Fantasia Trading

Masonry Cutting Disc 115 x 1.6 x 22.2mm

Masonry Cutting Disc 115 x 1.6 x 22.2mm

Regular price R 19.00 ZAR
Regular price Sale price R 19.00 ZAR
Sale Sold out
Tax included.


Tork Craft Masonry Cutting Disc 115 x 1.6 x 22.2 mm



At a Glance: 115 mm masonry cutting disc with a 1.6 mm thickness and nominal 22.2 mm bore. Resin-bonded silicon carbide abrasive for cutting brick, concrete and stone using a compatible angle grinder. Maximum speed: 13,300 rpm.



Get your next building or renovation project moving with the Tork Craft ABR115M-1 Masonry Cutting Disc. Designed for compatible 115 mm angle grinders, this abrasive disc provides a practical way to trim brick, cut suitable concrete components and size stone within the tool's cutting capacity. Its 1.6 mm thickness creates a narrow cutting profile, while the resin-bonded silicon carbide abrasive performs the material-removal action. From preparing masonry pieces for a better fit to making controlled cuts during repair work, this disc is a useful addition to your cutting accessories.




Silicon carbide abrasive for masonry cutting

The ABR115M-1 uses silicon carbide abrasive held together by a resin bond. Abrasive grains along the rotating outer edge remove material to form the cut. This is a dedicated masonry cutting disc: keep it aligned with the cutting line and use the outer edge for material separation.





Product highlights



  • Masonry applications: Suitable for cutting brick, concrete and stone.

  • 115 mm diameter: Sized for angle grinders approved to accept this disc diameter and type.

  • 1.6 mm thickness: Provides a narrow cutting profile for trimming and sizing work.

  • Silicon carbide abrasive: An abrasive material suited to masonry cutting applications.

  • Resin bond: Holds the abrasive grains together in the cutting disc.

  • Conventional mounting: Nominal 22.2 mm bore for compatible angle grinder flanges.





Compatibility



  • Angle grinders: For machines approved to use 115 mm bonded abrasive cutting discs.

  • Mounting components: Use the grinder manufacturer's correct flanges and retaining nut for the disc's bore and thickness.

  • Speed rating: The grinder's rated maximum speed must not exceed the disc's 13,300 rpm limit.

  • Cutting guard: Fit the protective guard specified by the grinder manufacturer for abrasive cutting.

  • Dust extraction: Use a compatible cutting shroud and suitable dust extractor when cutting masonry.


View full details